New Design American Accurate Collator for Lee PRO 1000 and Loadmaster Press

Description

You are bidding on: 1
Black
American Accurate Case Collator and 1 stainless steel adaptor plate for pistol case. This case feeder will fit on Lee Pro 1000 and Lee Loadmaster presses
Note: The
RED
LEE COLLATOR
is not included
Descriptions
American Accurate
case feeder© is a new and improved design. It is the
most economical, durable, and fast rifle and pistol case feeder.
You can get your brass lined up in the tubes ready for reloading in less than ten seconds. This case feeder is carefully designed, engineered, quality controlled and packaging in the USA. Products made in China
The end of the funnel has been lengthened in order to provide a more secure fitting onto the 4 plastic casing tubes.
The inside of the collator is more of a step down funnel shape, and has ridges which provide a better texture, allowing for the brass to line up in a bottom-first arrangement before being sent down the tubes.
The openings of the 4 chambers are flare and more of a graduated down-slope, which provides more ease so that the brass casing can be channeled down the cylinders.
The American Accurate Case Collator Feeder is built of a sturdy, reliable, and more durable material so that it will last a lot longer on the wear and tear associated with case reloading.
AA Collator has a larger pan area, which provides a better surface area for the casings to move into the correct bottom-down orientation.
Important Notice
We observed many YouTuber who are excited to use our product, ignored the instructions, they filled the case right at the center directly above the holes and filled it too much cause it to jam and leave no room for the case to vibrate and correct itself on the way to the center. Before using this collator, we would ask that you please read the following tips and guidelines in order to utilize the efficacy of this case feeder:
Even though the case feeder has a larger diameter than the original LEE Collator, this feature was not intended to fill the collator completely full of brass; if this occurs, the brass will crowd and press against each other, which will not allow them to flow down the chambers effectively and cause it to be upside down.
DO NOT
fill the case right at the center or directly above the holes.
In order to correctly use the collator, begin by filling up the hopper about 1 hand full start from the outer away from the center while shaking in a short circular motion. This will allow the room and the vibration needed for the brass to arrange in the proper orientation, without jamming them together.
The easy way to insert the tube in the bottom of AA Collator is tilt the tube in about 5 -10 degree then push forward. It is harder to insert all four tubes at once in the LEE black plastic revolver. We recommend to leave the tube hang out unevenly before insert them into LEE black plastic revolver. After all four tubes are partially inserted in both AA Collator and LEE black plastic revolver, press the top AA collator until all tubes are seated all the way.
The AA Stainless Steel Adapter Plate will work with 9mm and smaller cases.
Any case bigger than 9mm, does not require the Adaptor plate.
Our hope is that you will be satisfied with the advantages and improvements of our case collator, and that you will spread the word to the reloading community. We would also appreciate any feedback you have, and also welcome any reviews to be posted to our Facebook, YouTube, Amazon, and other forum communities. Thank you for supporting American Accurate.
Shipping:
Free shipping items are applied to 48 states only. We will ship international, the shipping rate will apply. Item will be shipped out within 48 hours upon receipt of your payment.
We will Ship to Canada, Puerto Rico, Alaska, and Hawaii upon request only for an additional Shipping Fee.
Please provide PayPal verified shipping address. We are not taking any responsibility for any undeliverable addresses. Local pick up is free
Returns:
Our products have 90 days warranty. We encourage you to ask questions before bidding or buying.
If you are not satisfy our product for any reason within 14 days please contact us, we will send you a free return label and a full refund back to your account. Try it, if you don’t like it return it hassle-free.
Payment:
We accept PayPal only.
Feedback:
We maintain high standards of excellence and strive for 100% customer satisfaction.
Feedback is very important to us. Please share your positive experiences with YouTube, Amazon and reloading community forum. Thank you
Complain:
We notice our price is little high. AA collator is not a massive common house products selling at Walmart. The custom mold cost us over ten thousand US dollars not included minimum order, tariffs and shipping oversea. We are just trying to break even and have enough funds to develop new exciting products in the near future. We may also build an adaptor for the AA Collator to fit the RCBS, Dillon, Hornady Lock N Load and other reloading press.
Warnings
When working with gun powder, no open flames, grinding, cutting, torching, or smoking at least 35 feet away from working area.
Always wear proper protective equipment.